Customer premise service study for 30/20 GHz satellite system

Satellite systems in which the space segment operates in the 30/20 GHz frequency band are defined and compared as to their potential for providing various types of communications services to customer premises and the economic and technical feasibility of doing so. Technical tasks performed include: market postulation, definition of the ground segment, definition of the space segment, definition of the integrated satellite system, service costs for satellite systems, sensitivity analysis, and critical technology. Based on an analysis of market data, a sufficiently large market for services is projected so as to make the system economically viable. A large market, and hence a high capacity satellite system, is found to be necessary to minimize service costs, i.e., economy of scale is found to hold. The wide bandwidth expected to be available in the 30/20 GHz band, along with frequency reuse which further increases the effective system bandwidth, makes possible the high capacity system. Extensive ground networking is required in most systems to both connect users into the system and to interconnect Earth stations to provide spatial diversity. Earth station spatial diversity is found to be a cost effective means of compensating the large fading encountered in the 30/20 GHz operating band

Casimir Energy of a Spherical Shell

The Casimir energy for a conducting spherical shell of radius $a$ is computed using a direct mode summation approach. An essential ingredient is the implementation of a recently proposed method based on Cauchy's theorem for an evaluation of the eigenfrequencies of the system. It is shown, however, that this earlier calculation uses an improper set of modes to describe the waves exterior to the sphere. Upon making the necessary corrections and taking care to ensure that no mathematically ill-defined expressions occur, the technique is shown to leave numerical results unaltered while avoiding a longstanding criticism raised against earlier calculations of the Casimir energy.Comment: LaTeX, 14 pages, 1 figur

Multiple Scattering: Dispersion, Temperature Dependence, and Annular Pistons

We review various applications of the multiple scattering approach to the calculation of Casimir forces between separate bodies, including dispersion, wedge geometries, annular pistons, and temperature dependence. Exact results are obtained in many cases.Comment: 15 pages, 12 figures, contributed to the Festschrift for Emilio Elizald

Dynamics of a suspended nanowire driven by an ac Josephson current in an inhomogeneous magnetic field

We consider a voltage-biased nanoelectromechanical Josephson junction, where a suspended nanowire forms a superconducting weak-link, in an inhomogeneous magnetic field. We show that a nonlinear coupling between the Josephson current and the magnetic field generates a Laplace force that induces a whirling motion of the nanowire. By performing an analytical and a numerical analysis, we demonstrate that at resonance, the amplitude-phase dynamics of the whirling movement present different regimes depending on the degree of inhomogeneity of the magnetic field: time independent, periodic and chaotic. Transitions between these regimes are also discussed.Comment: 7 pages, 5 figure

Mode-by-mode summation for the zero point electromagnetic energy of an infinite cylinder

Using the mode-by-mode summation technique the zero point energy of the electromagnetic field is calculated for the boundary conditions given on the surface of an infinite solid cylinder. It is assumed that the dielectric and magnetic characteristics of the material which makes up the cylinder $(\epsilon_1, \mu_1)$ and of that which makes up the surroundings $(\epsilon_2, \mu_2)$ obey the relation $\epsilon_1\mu_1= \epsilon_2\mu_2$. With this assumption all the divergences cancel. The divergences are regulated by making use of zeta function techniques. Numerical calculations are carried out for a dilute dielectric cylinder and for a perfectly conducting cylindrical shell. The Casimir energy in the first case vanishes, and in the second is in complete agreement with that obtained by DeRaad and Milton who employed a Green's function technique with an ultraviolet regulator.Comment: REVTeX, 16 pages, no figures and tables; transcription error in previous version corrected, giving a zero Casimir energy for a tenuous cylinde

Scalar Field Dark Energy Perturbations and their Scale Dependence

We estimate the amplitude of perturbation in dark energy at different length scales for a quintessence model with an exponential potential. It is shown that on length scales much smaller than hubble radius, perturbation in dark energy is negligible in comparison to that in in dark matter. However, on scales comparable to the hubble radius ($\lambda_{p}>1000\mathrm{Mpc}$) the perturbation in dark energy in general cannot be neglected. As compared to the $\Lambda$CDM model, large scale matter power spectrum is suppressed in a generic quintessence dark energy model. We show that on scales $\lambda_{p} < 1000\mathrm{Mpc}$, this suppression is primarily due to different background evolution compared to $\Lambda$CDM model. However, on much larger scales perturbation in dark energy can effect matter power spectrum significantly. Hence this analysis can act as a discriminator between $\Lambda$CDM model and other generic dark energy models with $w_{de} \neq -1$.Comment: 12 pages, 13 figures, added new section, accepted for publication in Phys. Rev.

The Adler Function for Light Quarks in Analytic Perturbation Theory

The method of analytic perturbation theory, which avoids the problem of ghost-pole type singularities and gives a self-consistent description of both spacelike and timelike regions, is applied to describe the "light" Adler function corresponding to the non-strange vector channel of the inclusive decay of the $\tau$ lepton. The role of threshold effects is investigated. The behavior of the quark-antiquark system near threshold is described by using a new relativistic resummation factor. It is shown that the method proposed leads to good agreement with the ``experimental'' Adler function down to the lowest energy scale.Comment: 13 pages, one ps figure, REVTe

Realizability of metamaterials with prescribed electric permittivity and magnetic permeability tensors

We show that any pair of real symmetric tensors \BGve and \BGm can be realized as the effective electric permittivity and effective magnetic permeability of a metamaterial at a given fixed frequency. The construction starts with two extremely low loss metamaterials, with arbitrarily small microstructure, whose existence is ensured by the work of Bouchitt{\'e} and Bourel and Bouchitt\'e and Schweizer, one having at the given frequency a permittivity tensor with exactly one negative eigenvalue, and a positive permeability tensor, and the other having a positive permittivity tensor, and a permeability tensor having exactly one negative eigenvalue. To achieve the desired effective properties these materials are laminated together in a hierarchical multiple rank laminate structure, with widely separated length scales, and varying directions of lamination, but with the largest length scale still much shorter than the wavelengths and attenuation lengths in the macroscopic effective medium.Comment: 12 pages, no figure

Brane world corrections to scalar vacuum force in RSII-p

Vacuum force is an interesting low energy test for brane worlds due to its dependence on field's modes and its role in submillimeter gravity experiments. In this work we generalize a previous model example: the scalar field vacuum force between two parallel plates lying in the brane of a Randall-Sundrum scenario extended by $p$ compact dimensions (RSII-$p$). Upon use of Green's function technique, for the massless scalar field, the 4D force is obtained from a zero mode while corrections turn out attractive and depend on the separation between plates as $l^{-(6+p)}$. For the massive scalar field a quasilocalized mode yields the 4D force with attractive corrections behaving like $l^{-(10+p)}$. Corrections are negligible w.r.t. 4D force for $AdS_{(5+p)}$ radius less than $\sim 10^{-6}$m. Although the $p=0$ case is not physically viable due to the different behavior in regard to localization for the massless scalar and electromagnetic fields it yields an useful comparison between the dimensional regularization and Green's function techniques as we describe in the discussion.Comment: 14 pages, v2: discussion clarified, reference adde

Casimir Energy for a Spherical Cavity in a Dielectric: Applications to Sonoluminescence

In the final few years of his life, Julian Schwinger proposed that the ``dynamical Casimir effect'' might provide the driving force behind the puzzling phenomenon of sonoluminescence. Motivated by that exciting suggestion, we have computed the static Casimir energy of a spherical cavity in an otherwise uniform material. As expected the result is divergent; yet a plausible finite answer is extracted, in the leading uniform asymptotic approximation. This result agrees with that found using zeta-function regularization. Numerically, we find far too small an energy to account for the large burst of photons seen in sonoluminescence. If the divergent result is retained, it is of the wrong sign to drive the effect. Dispersion does not resolve this contradiction. In the static approximation, the Fresnel drag term is zero; on the mother hand, electrostriction could be comparable to the Casimir term. It is argued that this adiabatic approximation to the dynamical Casimir effect should be quite accurate.Comment: 23 pages, no figures, REVTe